Dell EMC NX3240 Einrichten - Seite 2
Blättern Sie online oder laden Sie pdf Einrichten für Lagerung Dell EMC NX3240 herunter. Dell EMC NX3240 2 Seiten. Network attached storage system using windows storage server 2016
Auch für Dell EMC NX3240: Handbuch zur Fehlersuche (12 seiten), Einrichten Ihres Systems (2 seiten)
Seite drucken
Setting up Your Dell EMC NX3240 and NX3340 Systems (continued)
|
4
Initial configuration
Starting remote desktop
NOTE:
Make sure that you have completed the Initial Configuration tasks before connecting to the NAS
•
Enable remote desktop using Server Manager or
system
properties (Control Panel → System).
•
If Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) are implemented on your network, your
system
can start remote desktop from a client and remotely access the NAS
D<ServiceTag>
For example, in the Remote Desktop Connection dialog box, type
To locate the Service Tag of your
system
, see the section
Locating your system Service Tag
Stor@ge!
NOTE:
The default password is
Copyright © 2018 Dell Inc. or its subsidiaries.
2018 - 05
Rev. A00
1.
When you start your NAS system that runs Windows Storage
Server 2016 for the first time, on the Default Password page,
click OK.
NOTE:
Before changing the password, make sure that you
change the system language according to your preference.
2.
To change your administrator password, press Ctrl+Alt+Del, and
then click Change a Password.
3.
To change the default language, navigate to
C:\Dell_OEM\MUI and run the appropriate language batch file.
Complete the on-screen instructions to install your
preferred language.
Server Manager starts automatically when you log in the first time.
In Server Manager, click Configure this local server to:
•
Change the computer name (if required)
•
Add NAS system to the domain
•
Check for latest Windows updates
•
Specify the time zone
•
Configure remote desktop
NOTE:
To start a software system, on the taskbar, click
Start, and then click the program name.
system
using remote desktop.
system
automatically configures the network settings. You
system
using either the default
name or the IP address.
, where < ServiceTag > is the Service Tag.
in this document.
All manuals and user guides at all-guides.com
|
5
More information
Dell EMC OpenManage Server Administration
You can monitor your system remotely by using Dell EMC OpenManage Server Administrator. To access Dell EMC OpenManage Server Administrator, connect to the
secure port, 1311, of your NAS system. For example, type: https://D<ServiceTag>:1311
system, see the section
Locating your system Service Tag
Documentation
For more information, see the following documentation at Dell.com/storagemanuals.
Title
Getting Started Guide
Installation and Service Manual
Rack Installation Guide
Administrator's Guide
Troubleshooting Guide
Dell EMC OpenManage Server
Administrator User's Guide
Documentation feedback
You can rate the documentation or write your feedback on any of our Dell EMC Documentation pages and click Send Feedback to send your feedback.
where
<ServiceTag>
,
in this document.
Description
Provides an overview of system features, setting up your system, and technical specifications. This document is also shipped with
your system.
Provides information about system features and describes the system and installing or replacing system components.
Describes the process of installing your system into a rack. This document is also shipped with your rack solution.
Provides information about configuring and managing the system.
Provides information about troubleshooting the software and the system.
Provides information about using the OpenManage Server Administrator to manage your Dell EMC system or NAS
system.
NOTE:
For any documentation related to Dell EMC OpenManage Server Administrator, go to Dell.com/openmanagemanuals
is Service Tag. To locate the Service Tag of your
.