3 Com U.S. Robotics 56K SERIAL CONTROLLER FAXMODEM Benutzerhandbuch & Referenz - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch & Referenz für Modem 3 Com U.S. Robotics 56K SERIAL CONTROLLER FAXMODEM herunter. 3 Com U.S. Robotics 56K SERIAL CONTROLLER FAXMODEM 19 Seiten. 3com user's guide & reference modem 56k

Seite drucken
To install the modem driver:
1. After Windows starts, the Add New Hardware Wizard will find a PCI Serial Controller. Click the Next
button to continue.
2. On the next dialog box, make sure "Search for the best driver for your device (Recommended)" is
checked. Click the Next button to continue.
3. Check the appropriate selection for your driver software. Insert the CD-ROM or floppy disk into the
appropriate drive and click the Next button to continue.
4. The Add New Hardware Wizard will display the driver that matches your modem. Click the Next
button to continue.
5. After the files are copied, the modem driver is installed. Click the Finish button to continue.
6. If your modem supports voice features, Windows will install the Wave Device for Voice Modem. The
Add New Hardware Wizard will appear again. Click the Next button to continue, and repeat steps 2
– 5.
Your modem and driver are now installed.
To uninstall the modem:
1. Open the Control Panel and start the System applet.
2. When the System Properties tabbed dialog box appears, click on the Device Manager tab.
3. Expand the Modem listing and click once to select the modem
4. Click the Remove button, then click OK to confirm that you want to remove modem.
5. Click the Close button to close the Device Manager.
6. Start the Add/Remove Programs applet.
7. Click to select the PCI Dos Box Support listing, then click the Add/Remove button. If prompted,
agree to restart the computer.
8. When the computer shuts down, you may remove the modem card.
I
NSTALLING
W
98 S
INDOWS
R
EMOVING THE
W
98 S
INDOWS
D
RIVERS FOR
E
ECOND
DITION
M
ODEM FROM
E
ECOND
DITION
4