Christ ALPHA C173 Kontrolle und Wartung - Seite 2
Blättern Sie online oder laden Sie pdf Kontrolle und Wartung für Waschmaschine Christ ALPHA C173 herunter. Christ ALPHA C173 2 Seiten.
Seite druckenWire rope
Check the wire rope:
1. Check the wire ropes for mechanical damage and corrosion.
2. In case of mechanical damage and corrosion contact the customer ser-
vice.
Grease the wire rope:
1. Grease with Aviacal 2 LD or any similar product from another manu-
facturer or grease spray.
2. Apply the grease on the wire ropes with a cloth or use the grease spray.
ATTENTION
Rope rupture
Crash of the horizontal nozzle / brush
Have the wire ropes replaced after approx.
15.000 washes or at the latest after one-and-
a-half year.
Nozzles
Check the spray quality of the nozzles:
1. Check the spray quality during the wash.
2. If the water distribution is insufficient, clean or replace the nozzles.
Grease the high-pressure pump
Grease the high-pressure pump:
1. Fill each drill hole with three drops of 15W-40 oil.
Quarterly check and maintenance
Check the guide pulleys for damage and wearout
Check the guide pulley:
1. Check the guide pulleys for damage and wearout. In case of damage
or wearout contact the customer service.
Carry out the oil change
Carry out the oil change:
1. Remove the oil gauge.
2. Keep the oil drip pan ready and remove the oil drain screw.
3. Collect the old oil and dispose of it properly.
4. Screw in the oil drain screw.
5. Fill the high-pressure pump with new oil up to the marking of the oil
gauge.
6. Screw in the oil gauge.
7. Check that the whole system is leak-tight.
Knowledge of the operation manual for the roll over wash unit and the operation terminal is required.
6550252-EN_00
04/05/21
Technical modifications reserved!
Carry out the oil change:
1. Unscrew the cover of the oil-filling aperture.
2. Keep the oil drip pan ready and remove the oil drain screw.
3. Collect the old oil and dispose of it properly.
4. Screw in the oil drain screw.
5. Fill the high-pressure pump with new oil up to the marking of the oil
gauge.
6. Screw in the cover of the oil-filling aperture.
7. Check that the whole system is leak-tight.
Further check and maintenance work
INFORMATION
Further check and maintenance work is men-
tioned in the operation manual and is carried out
in the course of commissioned maintenance by
one of the customer service teams authorised by
Otto Christ AG.
Check and maintenance
Roll over wash unit ALPHA C173
2 / 2