Dell PowerVault 160T LTO2 Handbuch - Seite 17

Blättern Sie online oder laden Sie pdf Handbuch für Lagerung Dell PowerVault 160T LTO2 herunter. Dell PowerVault 160T LTO2 28 Seiten. Dell lto media handbook

Seite drucken
Dell PowerVault
110T LTO-2
Dell PowerVault
40 full tape passes = 16TB or
110T LTO-3
8TB with verify enabled
* The Dell PowerVault LTO-3 tape drive has enabled period (maintenance) cleaning on the drive by default. Do
not be alarmed if you are seeing cleaning light come on more frequently than you are used to seeing on Dell
PowerVault LTO-2. If you perform a backup with verify, you will see a cleaning request twice as frequently as
when verify is not used. This is because verify enabled will double the amount of passes the tape makes over the
head. Most backup applications support Tape Alerts. If the drive is requesting cleaning the backup software
should notify the user of the need to clean.
9.3

Expired Cleaning Tape Characteristics

Drive Type
Dell PowerVault 110T LTO
Dell PowerVault 110T LTO-1
Dell PowerVault 110T LTO-2
Dell PowerVault 110T LTO-2-L
(Certance)
Dell PowerVault 110T LTO-2-L
(Tandberg)
Dell PowerVault 110T LTO-3
Table 6 Characteristics of expired LTO cleaning tape in various drives
The cleaning light on an LTO drive can come on for two reasons.
1. A periodic maintenance threshold has been exceeded.
2.
A high error rate has occurred
Dell LTO Media Handbook
Not Supported
*
Table 5 -Cleaning Characteristics Per Drive
Cleaning with a Good Tape
Ready light blinks green - Use cleaning
cartridge light comes on solid - ejects
(Power light on Solid-Green, Activity
light on Solid-Green, Status light on
Solid-Amber) Eject tape when done.
No 7 segment display indicator.
Activity light blinks green and tape
ejects when finished.
Power light on Solid-Green, Activity
light on Solid-Green, Status light on
Solid-Amber. Ejects tape when done.
Press and hold the Eject button for 6
sec. The drive enters "Service mode"
shown by all LED's flashing slowly.
Press Eject twice, the Activity LED
flashes fast, the double-click the Eject
No 7 segment display indicator.
Activity light blinks green and tape
ejects when finished.
50
50
Cleaning with an Expired Tape
Ready light blinks green - ejects tape
tape.
Power light on Solid-Green, Activity
Blinks-Amber and the tape is ejected
Pre firmware 53Y3 -
display indicator. Activity light blinks
green but ejects tape much quicker -
segment display shows 7, Activity light
blinks amber, and tape is ejected shortly
completely removed all light indicators
Power light on Solid-Green, Activity
Blinks-Amber and the tape is ejected
Cleaning light ON, Activity Light
Flashing, Fault Light Flashing,
Cartridge hold in the drive
When pressing Eject button, the
Cartridge is ejected and the Cleaning
button.
light stays ON.
7 segment display shows 7, Activity
light blinks amber, and tape is ejected
shortly after inserting. When tape is
completely removed all light indicators
C on 7 segment display
C on 7 segment display
out shortly after loading.
light on Solid-Green, Status light
shortly after inserting.
No 7 segment
shortly after loading.
Firmware 53Y3 and newer.
after inserting. When tape is
go out.
light on Solid-Green, Status light
shortly after inserting.
go out.
Page 17
–
7