support.dell.com
15. Click Next.
NOTE: If you selected file Specify a location, skip to step 19.
The Driver Files Search Results screen appears.
16. If the Update Device Driver Wizard states that a suitable driver is already
installed, click the checkbox next to Install one of the other drivers to locate the
correct driver.
17 . Click Next to continue.
The Driver Files Found screen appears, with all drivers for the device found.
18. Select the driver at the location you specified with the arrow keys or with the
mouse, and click Next.
NOTE: If you selected Floppy disk drives or CD-ROM drives, skip to step 23.
19. In the path for Copy manufacturer's files from, specify the folder name that
contains the device drivers, and click OK.
The Upgrade Device Driver Wizard searches the specified folder for the driver
files.
The Driver Files Search Results screen appears.
20. If the Update Device Driver Wizard states that a suitable driver is already
installed, click the checkbox next to Install one of the other drivers to locate the
correct driver.
21. Click Next to continue.
22. Highlight the driver you want to use. Ensure the correct driver is loaded by check-
ing the location column and click Next.
23. Click Finish.
24. Click Close.
NOTES: You must reboot your system for the changes to take effect.
If you installed a driver from a diskette, remove the diskette.
25. Close the Device Manager window and return to the NAS Manager window.
26. Click Shutdown from the Maintenance page of the NAS Manager.
27 . Select Restart and click OK.
28. Click OK again to confirm your selection.
NOTE: For most PCI cards, the driver installation is completed. If you are updat-
ing the driver for the PERC 2/DC RAID controller, continue to step 30 to install an
additional driver that is required for this controller. Make certain that you reboot
your system before performing the next step.
Updating Drivers on a PowerVault NAS Appliance
3
Seite drucken