Dell PowerVault MD3200 Series Handbuch für den Einsatz - Seite 22

Blättern Sie online oder laden Sie pdf Handbuch für den Einsatz für Lagerung Dell PowerVault MD3200 Series herunter. Dell PowerVault MD3200 Series 38 Seiten. Storage arrays
Auch für Dell PowerVault MD3200 Series: Handbuch aktualisieren (32 seiten), Anweisungen zur Rack-Installation (2 seiten), Support-Matrix (12 seiten), Installationshandbuch (18 seiten), Information Update (1 seiten), Support-Matrix (17 seiten), Technisches Handbuch (40 seiten), Weißbuch (22 seiten), Handbuch für den Einsatz (38 seiten), Handbuch für den Einsatz (38 seiten)

Seite drucken
Dell PowerVault MD3200 Series Handbuch für den Einsatz

Expanding With New PowerVault MD1200 Series Expansion Enclosures

Perform the following steps to attach new PowerVault MD1200 Series
expansion enclosures to a PowerVault MD3200 Series storage array:
1 Before adding the expansion enclosure(s), ensure that the storage array
software is installed and up to date. For more information, see the
Support Matrix at support.dell.com/manuals.
Install the software and driver package included on the PowerVault
a
MD3200 Series resource media. For information about installing the
software, see "Software Installation" on page 25.
Set up the MD1200 Series expansion enclosure(s). For information
b
about setting up the MD1200 Series expansion enclosure(s), see the
Hardware Owner's Manual at support.dell.com/manuals.
Using MDSM, update the RAID controller module firmware and
c
NVSRAM to the latest versions available on support.dell.com.
From the Enterprise Management Window (EMW), click Tools
Upgrade RAID Controller Module Firmware.
2 Stop I/O and turn off all systems:
Stop all I/O to the storage array and turn off affected host systems
a
attached to the storage array.
Turn off the storage array.
b
Turn off any expansion enclosure(s) in the affected system.
c
3 Cable the expansion enclosure(s) to the storage array.
4 Turn on attached units:
Turn on the expansion enclosure(s). Wait for the enclosure status
a
LED to light blue.
Turn on the storage array and wait for the status LED to indicate that
b
the unit is ready:
•
If the status LEDs light solid amber, the storage array is still
coming online.
•
If the status LEDs are blinking amber, there is an error that can be
viewed using MDSM.
•
If the status LEDs light solid blue, the storage array is ready.
22
Hardware Installation