Dell PowerVault MD3200i Series Weißbuch - Seite 12

Blättern Sie online oder laden Sie pdf Weißbuch für Lagerung Dell PowerVault MD3200i Series herunter. Dell PowerVault MD3200i Series 22 Seiten. Storage arrays
Auch für Dell PowerVault MD3200i Series: Handbuch für den Einsatz (41 seiten), Handbuch aktualisieren (32 seiten), Anweisungen zur Rack-Installation (2 seiten), Benutzerhandbuch (46 seiten), Support-Matrix (12 seiten), Installationshandbuch (18 seiten), Information Update (1 seiten), Support-Matrix (11 seiten), Support-Matrix (17 seiten), Technisches Handbuch (38 seiten), Handbuch (16 seiten)

Planning for Hyper-V: PowerVault™ MD3200 and MD3200i Series of Arrays

To choose the service level to use, examine the needs of the applications connected to the storage

array. For instance, if you have your servers set up to iSCSI boot, or are using virtualization to "hide"

the storage array (and the guest OS is booting off a C: drive that is actually on the storage array),

select EF because the data must get to the server and, if there is latency, the server locks up. On the

other hand, if you might want all of your traffic coming in from the worldwide web, set to the lowest

possible class of AF so that the service level does not affect your critical data.

Considerations for Storage and Network Adapters

(PowerVault™ MD3200 and MD3200i Storage Arrays)

When planning for the network configuration, make sure that you have at least two network adapters

assigned for your virtual machine (VM) traffic. If you are planning to add MS-Exchange, MS-SQL, MS-

SharePoint, or a similar configuration to your VMs, use two dedicated network connections for each of

those applications. For example, if you have a file server, MS-Exchange, and a SQL server running on

VMs, you should have six network connections (two for MS-Exchange, two for the SQL server, one for

the file server, and one for managing the Hyper-V server). For clustering, have two additional network

connections for the cluster heartbeat.

The connection to the Dell PowerVault MD3200 storage array is SAS based. Error! Reference source

not found. shows how the SAS storage cabling is configured.

Dell PowerVault MD3200 Storage System (SAS) Cabling Configuration

Figure 3.

For the iSCSI-based Dell PowerVault MD3200i storage array, you must have two NICs for I/O to the

storage array for each server. Set up the management ports (out-of-band) for managing the MD3200i

storage array because they are required for the initial configuration. For best performance when

Page 10