Dell PowerVault ML6000 Erste Schritte - Seite 7

Blättern Sie online oder laden Sie pdf Erste Schritte für Lagerung Dell PowerVault ML6000 herunter. Dell PowerVault ML6000 12 Seiten. Dell powervault ml6000 library managed encryption enablement instructions
Auch für Dell PowerVault ML6000: Wichtige Informationen Handbuch (26 seiten), Erste Schritte (24 seiten), Handbuch "Erste Schritte (4 seiten), Faq (26 seiten), Schnellstart-Handbuch (7 seiten), Ergänzendes Handbuch (1 seiten)

Dell PowerVault ML6000 Erste Schritte
Connect Module Cables and Module Terminators
All libraries must use module terminators. Libraries that consist of
multiple modules must use module cables.
CAUTION: The module terminator is not the same as a SCSI
terminator. Using a SCSI terminator instead of a module terminator
can damage the library.
Using the module-to-module cables from the accessory kit, connect
4a
each module to the one above it. Attach one end of the cable to the
bottom module. Then attach the other end to the module above it.
Using the module terminators from the accessory kit, terminate the
4b
topmost and bottommost modules.
モジュール ケーブルとモジュール ターミネータ
の接続
ライブラリは必ずモジュール ターミネータを使用しなければなり
ません。複数のモジュールで構成されるライブラリは、ケーブル
を複数使用する必要があります。
警告 : モジュール ターミネータは、SCSI ターミネータとは
異なります。モジュール ターミネータの代わりに SCSI ターミ
ネータを使用すると、ライブラリが破損する可能性があります。
4a
アクセサリ キットに含まれる、モジュール間をつなぐケーブ
ルを使い、それぞれのモジュールをすぐ上のモジュールに接続
します。ケーブルの一方の端を、下のモジュールに接続しま
す。ケーブルのもう一方の端を、すぐ上のモジュールに接続し
ます。
4b
アクセサリ キットに含まれるモジュール ターミネータを使い、
一番上のモジュールと一番下のモジュールを終端処理します。