Dell PowerVault NX1950 Handbuch für den Einsatz - Seite 20

Blättern Sie online oder laden Sie pdf Handbuch für den Einsatz für Lagerung Dell PowerVault NX1950 herunter. Dell PowerVault NX1950 38 Seiten. For vmware esx server software
Auch für Dell PowerVault NX1950: Handbuch für den Einsatz (34 seiten), Wichtige Informationen Handbuch (26 seiten), Erste Schritte (49 seiten), Handbuch für Installation und Fehlersuche (48 seiten), Upgrade-Handbuch (18 seiten), Referenzhandbuch (4 seiten), Einrichten (2 seiten), Verwendung von (2 seiten), Konfigurationshandbuch (11 seiten)

Modular Disk Storage Manager (Integrated Solution)

The Dell PowerVault Modular Disk Storage Manager is pre-installed on your

PowerVault NX1950 solution. The Modular Disk Storage Manager allows

users to easily navigate the configuration options available for the PowerVault

MD3000 storage system. Most of the provisioning and configuration tasks can

be performed within the PowerVault NX1950 Management console in the

Share and Storage Management snap-in. The Modular Disk Storage Manager

is used only under fault conditions or to perform advanced provisioning

and configuration tasks. For information about advanced features available on

the Modular Disk Storage Manager application, see the documentation that

was shipped with your PowerVault MD3000 storage array.

The EMC Navisphere Manager is pre-installed on your PowerVault NX1950

solution. The Navisphere Manager allows users to easily navigate the configuration

options available for the Dell|EMC storage array. Most of the provisioning

and configuration tasks can be performed within the PowerVault NX1950

Management console in the Share and Storage Management snap-in.

The Navisphere Manager is used only under fault conditions or to perform

advanced provisioning and configuration tasks. For information about

advanced features available on the Navisphere Manager application, see

the documentation that was shipped with your Dell|EMC storage array.

The Group Manager is pre-installed on your PowerVault NX1950 solution.

The Group Manager allows users to easily navigate the configuration options

available for the PS series storage array. Most of the provisioning and

configuration tasks can be performed within the PowerVault NX1950

Management console in the storage manager for SANs snap-in. For more

information on the Group Manager, see the documentation that was shipped

with your PS Series storage array. To launch Group Manager, open a web

browser and enter the group IP address.

Deployment Guide