Dell PowerVault NX3500 Einrichten - Seite 2
Blättern Sie online oder laden Sie pdf Einrichten für Lagerung Dell PowerVault NX3500 herunter. Dell PowerVault NX3500 2 Seiten. Dell powervault network attached storage solution
Auch für Dell PowerVault NX3500: Technisches Handbuch (17 seiten)
Seite drucken
Completing Your Solution Setup
5
|
Using The PowerVault Confi guration Utility And Modular Disk Storage Manager Client
Launching The Confi guration Wizard
From the management station, launch the PowerVault Confi guration Utility and follow
the instructions on the screen.
The PowerVault Confi guration Utility guides you through the network confi guration and
enables you to set up and access the PowerVault NX3500 controllers on the management
station.
Configuring Your System
6
|
System Confi guration
The PowerVault NX3500 web interface provides information about the controller and
guides you through the steps necessary to confi gure the network for your clustered NAS
solution. The web interface automatically launches after you complete the PowerVault
Confi guration Wizard.
NOTE:
If your web browser does not display the PowerVault NX3500 web interface, check
the security settings of the web browser, accept the security certifi cate, and ensure that
JavaScript is enabled.
To access the PowerVault NX3500 web interface at a later time, type the following URL in
your web browser https://<NAS Management VIP>.
Completing Your Setup
1.
Copy the IQN numbers from the Confi gurations Results screen without closing
the screen.
2.
Launch the Modular Disk Storage Manager Client and click the Mappings tab.
Default User Name And Password
The default user name for the solution is
admin
The default password for the solution is
Stor@ge!
To complete the system confi guration, complete the following steps in the PowerVault
NX3500 web interface:
•
Configuring DNS
•
Configuring time
•
Configuring e-mail
•
Configuring SNMP
•
Setting up file system
•
Changing the administrator password
•
Configuring system identity
•
Configuring identity management
•
Configuring cross protocol
•
Creating NAS volumes
•
Creating CIFS shares
•
Creating NFS exports
3.
In the mappings screen, right-click the host group and select Defi ne
→ Host. Enter a
host name and click Next.
For example, PV-NX3500-Controller-0
Other Information You May Need
7
|
Documentation
Title
The Getting Started Guide provides an overview of system features, setting up your solution, and technical specifi cations.
Getting Started Guide
This document is shipped with your system and is also available at support.dell.com/manuals.
The Hardware Owner's Manual provides information about solution features and describes how to troubleshoot the system
Hardware Owner's Manual
and install or replace system components. This document is available at support.dell.com/manuals.
The rack documentation included with your rack solution describes how to install your system into a rack. This document is
Rack Installation Instructions
shipped with your rack solution and is also available at support.dell.com/manuals.
The Administrator's Guide provides information about confi guring, managing, and troubleshooting the software and the
Administrator's Guide
solution. This document is available at support.dell.com/manuals.
The online help provides information about confi guring and managing the software. The online help is integrated with the
Online Help
system and can be accessed from the PowerVault NX3500 web interface.
Information in this publication is subject to change without notice.
© 2011 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly prohibited.
Dell™, the DELL logo, and PowerVault™ are trademarks of Dell Inc. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
4.
On the second screen, enter the IQN for the controller and provide a user label. The
user label must not be the same as the host name. It is recommended that you use the
host name appended with -IQN.
For example,
PV-NX3500-Controller-0-IQN
5.
Repeat step 3 and step 4 for controller 1.
6.
Close the Modular Disk Storage Manager Client.
7.
In the Confi guration Results screen of the PowerVault Confi guration Utility,
click Finish.
Description
Printed in the U.S.A.
2011 - 02