Dell PowerVault SDLT 220 Handbuch - Seite 14

Blättern Sie online oder laden Sie pdf Handbuch für Lagerung Dell PowerVault SDLT 220 herunter. Dell PowerVault SDLT 220 20 Seiten. Dell powervault dlt, vs, and sdlt media handbook version 2.0

Seite drucken
Cartridge Inspection
•
Case: Inspect the case for cracks, chips, or signs of damage.
•
Cartridge: Inspect the exterior of the cartridge for chips, cracks, dents, or missing screws.
Gently shake the cartridge. Listen for rattling or loose pieces.
•
Cartridge Door: Ensure that the door is moveable and that the spring is present.
•
Write Protect Switch: Move the switch. It should snap into write-protected mode and write-
enabled mode.
•
Cartridge Leader: Gently inspect the cartridge leader to verify that it has not been damaged
and is in the correct position.
•
DLTtape Cartridges: Check the height of the leader to ensure that the loop is sticking up
approximately 3/16 inch or 4 mm. Ensure that the door operates. DLT tape leader loop
should be visible and undamaged.
•
Super DLTtape Cartridges: Check that the Super DLTtape leader buckle aligns with
cartridge edge and metal pin is not bent.
NOTE:
such as a pen or pencil.
Figure 1-18. DLTtape Leader Loop
12
Dell PowerVault DLT, VS, and SDLT Media Handbook Version 2.0
When inspecting the cartridge leader do not use anything that could leave contamination,