Dell PowerVault TL2000 Erste Schritte - Seite 32

Blättern Sie online oder laden Sie pdf Erste Schritte für Lagerung Dell PowerVault TL2000 herunter. Dell PowerVault TL2000 38 Seiten. Tape library
Auch für Dell PowerVault TL2000: Anmerkungen zur Veröffentlichung (3 seiten), Faq (26 seiten), Schnellstart-Handbuch (7 seiten), Software-Handbuch (16 seiten), Konfigurationshandbuch (22 seiten), Wichtige Informationen Handbuch (10 seiten), Benutzerhandbuch Addendum (2 seiten), Handbuch "Erste Schritte (3 seiten), Anbringung von Anweisungen (17 seiten), Broschüre (4 seiten), Benutzerhandbuch (20 seiten)

Dell PowerVault TL2000 Erste Schritte

Cartridge Magazines

The library has removable magazines. Magazine access is password protected. For
safety reasons, the accessor motion is stopped when a magazine is removed.
The magazines can be released using the Operator Control Panel or the Web User
Interface. In case the Operator Control Panel or Web User Interface initiated
process has failed or the library no longer has power, a manual emergency release
is available.
Important: To manually release a magazine, refer to the Dell PowerVault TL2000
2U Library Cartridge Magazines
The 2U library has two cartridge magazines. The left cartridge magazine (see
Figure 1-28) has eleven storage slots and houses the 1-slot I/O Station. The right
magazine (see Figure 1-29 on page 1-23) has twelve storage slots. For information
about Element Addressing, refer to the Dell PowerVault TL2000 Tape Library and
TL4000 Tape Library User's Guide.
Note: On some 2U Libraries prior to Library Microcode Level 1.9, slot 11 may be
Figure 1-28. 2U library left magazine
1-22
Getting Started with the Dell PowerVault TL2000 and TL4000 Tape Libraries
Tape Library and TL4000 Tape Library User's Guide. This manual process
should only be used if the magazine cannot be released using the
Operator Control Panel or the Web User Interface.
labelled a "Not Used" slot which contained a "Slot Blocker". With Library
Microcode level 1.9 or higher, there is an option to remove the "Slot Blocker"
and place that slot into use.