Dell PowerVault TL4000 Software-Handbuch

Blättern Sie online oder laden Sie pdf Software-Handbuch für Lagerung Dell PowerVault TL4000 herunter. Dell PowerVault TL4000 16 Seiten. Tape library
Auch für Dell PowerVault TL4000: Anmerkungen zur Veröffentlichung (3 seiten), Erste Schritte (38 seiten), Faq (26 seiten), Schnellstart-Handbuch (7 seiten), Konfigurationshandbuch (22 seiten), Wichtige Informationen Handbuch (10 seiten), Benutzerhandbuch Addendum (2 seiten), Handbuch "Erste Schritte (3 seiten), Anbringung von Anweisungen (17 seiten), Broschüre (4 seiten), Benutzerhandbuch (20 seiten)

Seite drucken
Dell PowerVault TL4000 Software-Handbuch
Dell™ Model TL2000/TL4000 1GB
iSCSI to SAS bridge iSCSI initiators

Table of Contents

Installing the iSCSI Initiator on a Windows Host Server............................................................3
Installing the iSCSI Initiator on a Linux Host Server..................................................................3
Installing the iSCSI initiator during RHEL 4 installation .........................................................3
Installing the iSCSI initiator after RHEL 4 installation: ...........................................................3
Installing the iSCSI Initiator on a RHEL 5 System.....................................................................4
Installing the iSCSI initiator during RHEL 5 installation: ........................................................4
Installing the iSCSI initiator after RHEL 5 installation: ...........................................................4
Installing the iSCSI Initiator on a SLES 9 System .....................................................................4
Installing the iSCSI initiator during SLES 9 installation:.........................................................4
Installing the iSCSI initiator after SLES 9 installation:............................................................4
Installing the iSCSI Initiator on a SLES 10 SP1 System ...........................................................5
Install the iSCSI initiator during SLES 10 SP1 installation:....................................................5
Installing the iSCSI initiator after SLES 10 SP1 installation:..................................................5
Perform Target Discovery from the iSCSI Initiator ........................................................................5
Using Windows Server 2003 or Windows Server 2008 GUI version.........................................5
Using Windows Server 2008 Core Version ...............................................................................6
Using Linux Server ....................................................................................................................6
Using RHEL 5 or SLES 10 SP1 ................................................................................................6
Configure CHAP Authentication on the Host Server (optional).....................................................7
Using Windows Server 2003 or Windows Server 2008 GUI version.........................................7
Using Windows Server 2008 Core Version ...............................................................................7
Using Linux Server ....................................................................................................................8
If you are using RHEL 5 or SLES 10 SP1 .................................................................................8
If you are using SLES10 SP1 via the GUI .................................................................................8
Page 1