3 Day Blinds HONEYCOMB SHADES UltraLift Cordless Erste Schritte

Blättern Sie online oder laden Sie pdf Erste Schritte für Jalousien 3 Day Blinds HONEYCOMB SHADES UltraLift Cordless herunter. 3 Day Blinds HONEYCOMB SHADES UltraLift Cordless 5 Seiten.

Seite drucken

HONEYCOMB SHADES

UltraLift Cordless™

GETTING STARTED

A few simple tools are required:

Steel Tape Measure

Power Drill and

Flathead & Phillips

Drill Bits

Included in your order is all the hardware necessary for a

normal installation. Depending on the mounting surface,

fasteners other than the screws provided may be required.

Wall board and plaster require the use of anchors such as

expansion or toggle bolts. Bricks, tile and stone need special

plugs and drill bits. Wood should always be pre-drilled to

avoid splitting.

Professional installation is also available in most areas,

call 800-800-3329.

STANDARD HARDWARE

Screws

Mounting Brackets

OPTIONAL HARDWARE

Extension Bracket

1 | Honeycomb Shades UltraLift Cordless™

Pencil

Level

Awl (or tool for starting

Screwdriver

a screw hole)

Spacers

Hold Down Brackets

with Screws

BRACKET INFORMATION

The brackets you received with your product are required for

proper installation. Brackets should be installed 2" from each

end. Any additional brackets will need to be evenly spaced

between the two end brackets.

INSIDE MOUNT

• The brackets are mounted flat against the top sill surface.

Place the bugle head screw through the hole closet to the

front of the bracket. To fully recess the shade requires a flat

surface with a minimum depth of 1

requires

" minimum.

• Additional brackets, if included, are REQUIRED for proper

installation and should be installed evenly spaced between

the two end brackets.

• Proceed to "Shade Installation".

". Shallow mountain