Dell Networking S4048 Installationshandbuch - Seite 33
Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Dell Networking S4048 herunter. Dell Networking S4048 44 Seiten.
Auch für Dell Networking S4048: Handbuch "Erste Schritte (24 seiten)
Seite drucken
Besides the 10 GbE and 40 GbE switch ports, the S4048–ON system provides several ports for management and storage.
Topics:
•
RS-232 console port access
•
Micro USB-B console port access
•
Before you install an OS
RS-232 console port access
The RS-232 console port is on the PSU-side of the S4048-ON chassis, as shown.
Figure 21. S4048–ON RS–232 console ports
1
Ethernet management port
2
RS-232 console port
NOTE:
Before starting this procedure, be sure that your PC has a 9-pin serial port and that you have a terminal emulation
program already installed and running on the PC.
NOTE:
If your PC's serial port cannot accept a female DB-9 connector, acquire a DB-9 male-to-male adaptor.
1
Install the provided RJ-45 connector side of the provided cable into the S4048-ON console port.
2
Install the DB-9 female side of the provided copper cable into your PC's serial port or into other data terminal equipment (DTE) server
hardware that you intend to use.
3
Keep the default terminal settings on the console as follows:
•
115200 baud rate—set the MicroUSB console port to 9600 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
Micro USB-B console port access
The MicroUSB-B console port is on the I/O side of the S4048-ON.
The terminal settings are the same for the MicroUSB-B console port and the RS-232/RJ-45 console port:
Management ports
Management ports
8
33