Avvio C192069 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Elektrowerkzeug Avvio C192069 herunter. Avvio C192069 11 Seiten. 20 volts cordless inflator

Seite drucken

OPERATION

The inflator is not designed for continuous use. For every five minutes of

NOTICE:

minutes of cool down time are required.

Since the pressure gauge is not calibrated and is not binding for exact values, tire pressure

WARNING:

must be checked using a reliable measuring device before driving a vehicle tires inflated

with

The inflator is capable of inflating to 6.8 Bar. To avoid overinflation, carefully follow

NOTICE:

instructions on items to be inflated. To avoid product damage, never exceed

recommended pressures.

APPLICATIONS

You may use this inflator for the purpose listed below: Inflating items such as motorcycle,

car, and bicycle tires.

NOTE: The inflator is not designed for commercial applications.

Battery tools are always in operating condition. Always remove battery pack from your tool

WARNING:

when you are assembling parts, making adjustments, cleaning, or when not in use. Removing

battery pack will prevent accidental starting that could cause serious personal injury.

TO INSTALL/REMOVE BATTERY PACK

To install:

Place the battery pack in the tool

Make sure the latches on the battery pack snap in place and the battery pack is secured in the tool

before

To remove:

Depress the latches in the front of the battery pack to release and remove it from the tool.

AIR HOSE AND ACCESSORY STORAGE

When the inflator is not in use, press the hose into the storage area on top of the tool.

When not in use, adaptors and needles provided with the inflator can be placed in the storage area

of the tool.

LED WORKING LIGHT

When working, the LED light on the base of the tool is on

START SWITCH AND SELF-LOCKING SWITCH

When

start switch, push self-locking switch up, which will lock the switch in the "ON"

position. This guarantees the safety for the user and of the tool.

After reaching the desired pressure, press the Start switch. The self-locking switch will spring down.

USING THE INFLATOR

See Figure 1

Install the battery pack.

Position air chuck clamp in the unlock position perpendicular to the air hose.

Place the air chuck on the valve stem.

Push the air chuck down so that the threaded section of the valve stem is inside the air chuck. Clamp

the end of the air chuck down onto the valve stem by pressing air chuck clamp down until it stops or is

parallel with the air hose.

. Driving with improperly inflated tires could result in serious injury.

lign the rib on the battery pack with groove in the battery port.

, five