Dell PowerConnect B-RX4 Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Dell PowerConnect B-RX4 herunter. Dell PowerConnect B-RX4 17 Seiten. Instant access point
Auch für Dell PowerConnect B-RX4: Handbuch (10 seiten)

Seite drucken
Serial Console Port
The serial console port allows you to connect the AP to a serial terminal or a laptop for direct local management.
This port is an RJ-45 female connector with the pinouts described in
following ways:
Connect it directly to a terminal or terminal server using an Ethernet cable.
Use a modular adapter to convert the RJ-45 (female) connector on the AP to a DB-9 (male) connector, and
connect the adapter to a laptop using an RS-232 cable. See
Table 2
Connector
Figure 5
RJ-45 Female
Pin-Out
Direction
Input
Output

Power Connection

The access point has a single 12V DC power jack socket to support powering through an AC-to-DC power
adapter.
NOTE: If both POE and DC power are available, the AP uses POE even when there is not enough POE voltage available to power
the AP.

Verifying Post-Installation Connectivity

The integrated LEDs on the IAP can be used at this point to verify that the AP is receiving power and initializing
successfully (see
Table 3
LED
PWR
8
Console Port Pin-out
Pin
Signal Name
3
TXD
4
GND
5
GND
6
RXD
Pins not listed are not connected.
RJ-45 (Female) to DB-9 (Male) Modular Adapter Conversion
1
RJ-45
2
3
TxD
4
5
GND
6
RxD
7
8
Table
3).
W-IAP130 Series Access Point LED Meanings
Color/State
Off
Green steady
Green flashing
Red steady
Function
Transmit
Ground
Ground
Receive
Internal
Connections
DB-9
3
2
TxD
4
5
5
GND
6
3
RxD
Meaning
No power to AP
Power on, device ready
Device booting, not ready
System failed to initialize
Dell PowerConnect W-IAP130 Series Instant Access Point | Installation Guide
Table
2. Connect this port in one of the
Figure 5
for connector details of the adapter.
DB-9 Male
Pin-Out
5
Ground
9
4
8
3
RxD
7
2
TxD
6
1
Direction
Input
Output