Dell poweredge VRTX Benutzerhandbuch - Seite 18
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schalter Dell poweredge VRTX herunter. Dell poweredge VRTX 35 Seiten. Server
Auch für Dell poweredge VRTX: Handbuch "Erste Schritte (30 seiten), Freigabemitteilung (5 seiten), Handbuch "Erste Schritte (14 seiten), Schnellstart & Referenzhandbuch (2 seiten), Technisches Handbuch (45 seiten), Erste Schritte (2 seiten)
Figure 1. Removing and Installing the Shared PERC 8 Controller
1. release lever (2)
2. storage-controller card holder
3. storage controller card
4. battery
5. heatsink
Installing The Shared PERC 8 Controller
To install the Shared PERC 8 controller:
1.
Perform a controlled shutdown of the system and attached peripherals.
2.
Disconnect the system from the electrical outlet and remove the system cover.
3.
Install the storage controller in the appropriate controller slot.
CAUTION: When removing or replacing the Shared PERC 8 controller, hold the card by its edges marked by
the blue touch points. Do not handle the card while holding the battery or the heatsink.
For more information, see the relevant figures in
4.
Replace the system cover.
18
6. touch points (2)
7. storage-controller card connector on the
system board
8. guide pins (2)
Removing The Shared PERC 8
Controller.