Dell poweredge VRTX Benutzerhandbuch - Seite 29

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schalter Dell poweredge VRTX herunter. Dell poweredge VRTX 35 Seiten. Server
Auch für Dell poweredge VRTX: Handbuch "Erste Schritte (30 seiten), Freigabemitteilung (5 seiten), Handbuch "Erste Schritte (14 seiten), Schnellstart & Referenzhandbuch (2 seiten), Technisches Handbuch (45 seiten), Erste Schritte (2 seiten)

Corrective

The replacement disk is too small or not compatible with the virtual disk. Replace the failed

Action:

disk with a compatible good physical disk with equal or greater capacity.

Fatal Error Or Data Corruption Reported

Issue:

Fatal error(s) or data corruption(s) are reported when accessing virtual disks.

Corrective

Contact Dell Technical Support.

Action:

Issue:

One or more physical disks are displayed as Blocked and cannot be configured.

Corrective

Ensure the physical disk is supported by SCSI-3 Persistent Reservation (PR). Update the

Action:

physical disk and Shared PERC 8 to the latest firmware available on dell.com/support.

NOTE: For the Dell Update Package (DUP), update of the hard drive after it reports completed and perform a

graceful shutdown of all server modules and power cycle the chassis.

Issue:

Rebuilding the physical disks after multiple disks become simultaneously inaccessible.

Corrective

Multiple physical disk errors in a single array typically indicate a failure in cabling or

Action:

connection and can involve loss of data. You can recover the virtual disk after multiple physical

disks become simultaneously inaccessible. Perform the following steps to recover the virtual

disk:

If the virtual disk is redundant and transitioned to Degraded state before going Offline, a rebuild

operation starts automatically after the configuration is imported. If the virtual disk has gone

directly to the Offline state due to a cable pull or power loss situation, the virtual disk is

imported in its Optimal state without a rebuild occurring.

Issue:

Rebuilding a physical disk after one of them is in a failed state.

CAUTION: Follow the safety precautions to prevent electrostatic discharge.

1. Turn off the system, check cable connections, and reseat physical disks.

2. Ensure that all the disks are present in the enclosure.

3. Turn on the system and enter the Chassis Management Controller (CMC).

4. Use the CMC to import the foreign configuration that is detected or to clear the foreign

configuration.

NOTE: For information about import/recover or clear foreign configuration, see the

Chassis Management Controller for Dell PowerEdge VRTX User's Guide at dell.com/

esmmanuals.

Dell