AVYCON AVK-HN41V4-1T-NVR Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware AVYCON AVK-HN41V4-1T-NVR herunter. AVYCON AVK-HN41V4-1T-NVR 2 Seiten.

Seite drucken

5. Edit Camera"Checkmark the device you want to add and then click

"Add" button. The NVR will automatically refresh the cameras and

return to interface. The IP cameras (with PoE function) which directly

connectto the PoE port of the NVR will be displayed automatically

in the camera list. The IP camera which connects to the PoE port

cannot be deleted from the camera list manually. "Online" status

means connecting the device successfully and you will see the

live image.

Edit Camera

Edit Camera Group

No.

Camera Name

IP Address

Port

Status

Protocol

Model

[PoE1]IP Camera 1

192.168.1.20

Online

XXX

192.168.1.38

Offline

XXX

[PoE2]IP Camera 2

IP Camera 3

192.168.1.45

Online

XXX

Remain Bandwidth: 85 / 120 Mb

You may select the added device and click

channel, IP address, ect.

Edit IP Camera

IP Camera Name

IP Camera 3

IP Address

192 .168 . 1 . 58

Port

Protocol

XXX

Model

XXX

Username

admin

Password

Display Password

Test

• WAN

1. Set the network of the NVR. Go to Start → Settings → Network

→ TCP/IPv4. Input static IP address or enable PPPoE and then

input the user name and password received from your ISP.

2. Go to Start → Settings → Camera. Click "Add Camera" or

the column of the search camera and select "Manually Add" to add

the IP cameras. Input IP address, server port, username and password

of the IP camera. The IP camera must be connected over WAN. And

here the IP address of the IP camera must be a WAN IP address.

6. UPnP

You can use the UPnP function to enable the fast connection of

the device to WAN via a router without port mapping.

1. Go to Start → Settings → Network → UPnP, and enable UPnP

and then click "Apply" button to save.

2. Enable the UPnP function in the router.

3. Click "Refresh" button to refresh the UPnP status. If the UPnP

status were still "Invalid UPnP" after refreshing it for several times,

the port would be wrong. Please change the mapping type to

"Manual" and then click

to modify the port until the UPnP

status turns to "valid UPnP".

UPnP

Map Type

Port Type

HTTP Port

Server Port

RTSP Port

Search Camera

Preview

Edit

Delete

7. NAT

• NAT Setting

1. The NVR shall be powered on and connected to the network.

2. Go to Start → Settings → Network → TCP/IPv4. You can obtain

button to modify

the IP address, subnet mask and gateway automatically.

You can also manually enter them according to the actual network

situation. Please make sure the network segment is the same as

that of the network which is used.

3. Set the preferred or alternative DNS Server. Click "Apply" to

save the parameters.

4. Go to Start → Settings → Network → NAT tab. Enable NAT and

select the NAT Server Address (The default NAT Server Address

is nat.autonat.com). Click "Apply" to save the parameters.

Cancel

behind

• NAT Access

After ﬁnishing the NAT settings, you can input www.autonat.com in

the IE address bar and then press enter to go to the following

interface. If you are the ﬁrst time to access the NAT, you shall

download and install the ActiveX according to the popup tips.

After installing ActiveX successfully, it will pop the login box.

TCP/IPv4

Port

DDNS

E-mail

UPnP

NAT

Telnet

Enable

Auto

Port

UPnP Status

Edit

External Port

External Address

183.17.254.19

Valid UPnP

6036

Valid UPnP

183.17.254.19

6036

554

Invalid UPnP

554

Refresh

Apply

TCP/IPv4

Port

E-mail

UPnP

NAT

Telnet

DDNS

NAT

Visit Address

www.autonat.com

Enable

NAT Server Address

nat.autonat.com

Apply

Enter device serial number

Enter Username

Enter Password

Device Serial Number: Click

on the menu bar at the bottom of

the live interface to check the serial number or go to Start → Settings

→ Network → Network Status to check the serial number of the DVR).

Username: The username of the NVR. The default username is admin.

Password: The password of the NVR. The password is set by yourself

when you conﬁgure the wizard for the ﬁrst time.

9. Manual Recording

Before recording, please install and format a HDD. In the live

interface you can see the menu toolbar. Click

recording. Click it again to stop recording. You can also click

check the status of the recording.

10. Playback

• Instant Playback

Click "Instant Playback" in the right-click menu of the camera's

preview window to select or drag the playback progress bar

to change the playback time to play back the record.

• General Playback

Click

on the tool bar at the bottom of the live preview

interface or click Start → Playback to go to the playback interface

as shown below. You can also add the playback cameras manually.

Click

in the playback window to pop up the "Add Camera"

window. Check the cameras in the window and then click "Add"

to add playback camera. The record ﬁles of the added playback

camera will be played in the playback interface.

button to start