AVYCON AVR NT832A Schnellstart-Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware AVYCON AVR NT832A herunter. AVYCON AVR NT832A 11 Seiten.

10 Record Settings

Two record modes: auto and manual.

Auto Mode: Select one auto mode in the interface as shown below and then click "Next" to

save the settings. Click "Advanced" to self-deﬁne a record mode.

Manual Mode: Set the "Sensor Record", "Motion Record", "Analytics Record" and

"Schedule Record" of each camera. Please enable the record as needed. Click "Next" to

continue.

You can enable the NAT function in the interface or set it in the network conﬁguration after

exiting the wizard. You can scan the QR code through the mobile surveillance APP for iOS

or Android to easily view your cameras.

Web Access Through NAT Function

① Go to Start → Settings → Network → NAT tab. Enable NAT and select the NAT access

type(NAT1.0 or NAT2.0). Click "Apply" to save the parameters.

NETWORK VIDEO RECORDER | AVR SERIES | RESORD SETTINGS

Wizard

Network Settings

Add Camera

Disk Settings

Mode

Auto

Motion Record

Sensor Record

Motion Record+Sensor Record

Always(24x7)Record+Motion Record

Always(24x7)Record+Sensor Record

Always(24x7)Record+Motion Record+Sensor Record

Always(24x7)Record+Motion Record+Sensor Record+Analytics Record

Advanced

NAT

Enable

Access Type

NAT2.0(d2020.autonat.com:7968)

Visit Address

www.autonat.com

NAT Status

Success

Record Settings

Cancel

Apply