AVYCON AVR-HN516P16A Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware AVYCON AVR-HN516P16A herunter. AVYCON AVR-HN516P16A 2 Seiten.

Seite drucken

5. Checkmark the device you want to add and then click "Add"

button. The NVR will automatically refresh the cameras and

return to "Edit Camera" interface. "Online" status means connecting

the device successfully and you will see the live image. You may

select the added device and click

button to modify channel,

IP address, ect.

Edit Camera

Edit Camera Group

No.

Camera Name

IP Address

Port

Status

Protocol

Model

IP Camera 1

192.168.1.20

9008

Online

XXX

IP Camera 2

192.168.1.38

9008

Offline

XXX

IP Camera 3

192.168.1.45

9008

Online

XXX

Remain Bandwidth: 85 / 120 Mb

Edit Camera

Mac Address

CE :98 :23 :75 :35 :22

Address

192 .168 . 1 . 45

Subnet Mask

255 . 255 . 255 . 0

Gateway

192 .168 . 1 . 1

Username

admin

Password

• WAN

1. Set the network of the NVR. Go to Start → Settings → Network

→ PPPoE. Enable PPPoE and then input the user name and

password received from your ISP.

2. Go to Start → Settings → Camera. Click "Add Camera" or

behind the column of the search camera and select "Manually Add"

to add the IP cameras. Input IP address, server port, username and

password of the IP camera. The IP camera must be connected over

WAN. And here the IP address of the IP camera must be a WAN

IP address.

6. UPnP

You can use the UPnP function to enable the fast connection to

WAN via a router without port mapping.

1. Go to Start → Settings → Network → UPnP, and enable UPnP

and then click "Apply" button to save.

2. Enable the UPnP function in the router.

3. Click "Refresh" button to refresh the UPnP status. If the UPnP

status were still "Invalid UPnP" after refreshing it for several times,

the port would be wrong. Please change the mapping type to

"Manual" and then click

to modify the port until the UPnP

status turns to "valid UPnP".

Search Camera

Preview

Edit

Delete

7. NAT

• NAT Setting

1. The NVR shall be powered on and connected to the network.

2. Go to Start → Settings → Network → TCP/IP. You can obtain

the IP address, subnet mask and gateway automatically.

You can also manually enter them according to the actual network

situation. Please make sure the network segment is the same as

that of the network which is used.

3. Set the preferred or alternative DNS Server. Click "Apply" to

Sync to IPC

save the parameters.

4. Go to Start → Settings → Network → NAT tab. Enable NAT and

select the NAT Server Address (The default NAT Server Address

is nat.autonat.com). Click "Apply" to save the parameters.

Cancel

• NAT Access

After ﬁnishing the NAT settings, you can input www.autonat.com in

the IE address bar and then press enter to go to the following

interface. If you are the ﬁrst time to access the NAT, you shall

download and install the ActiveX according to the popup tips.

After installing ActiveX successfully, it will pop the login box.

UPnP

Enable

Map Type

Auto

External Port

Port

UPnP Status

Port Type

External Address

183.17.254.19

Valid UPnP

HTTP Port

HTTPS Port

443

183.17.254.19

443

Valid UPnP

6036

Valid UPnP

Server Port

6036

183.17.254.19

RTSP Port

554

183.17.254.19

554

Invalid UPnP

Refresh

Apply

NAT

Visit Address

www.autonat.com

Enable

NAT Server Address

nat.autonat.com

Apply

Enter device serial number

Enter Username

Enter Password

Device Serial Number: Click

the live interface to check the serial number or go to Start → Settings

→ Network → Network Status to check the serial number of the NVR).

Username: The username of the NVR. The default username is admin.

Edit

Password: The password of the NVR. The password is set by yourself

when you conﬁgure the wizard for the ﬁrst time.

9. Manual Recording

Before recording, please install and format a HDD. In the live

interface you can see the menu toolbar. Click

recording. Click it again to stop recording. You can also click

check the status of the recording.

10. Playback

• Instant Playback

Click "Instant Playback" in the right-click menu of the camera's

preview window to select or drag the playback progress bar

to change the playback time to play back the record.

• General Playback

Click

on the tool bar at the bottom of the live preview

interface or click Start → Playback to go to the playback interface

as shown below. You can also add the playback cameras manually.

Click

in the playback window to pop up the "Add Camera"

window. Check the cameras in the window and then click "Add"

to add playback camera. The record ﬁles of the added playback

camera will be played in the playback interface.

on the menu bar at the bottom of

button to start