EarthQuake Cinenova IR16 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken EarthQuake Cinenova IR16 herunter. EarthQuake Cinenova IR16 20 Seiten. 8-zones multi-source ir driven amplifier
Seite drucken
Cin
én
ova-IR16 Power Amplifier
Unpacking system components
Keep the original carton and packing materials for future
shipment or storage.
Check for any visual signs of damage. If you encounter any
concealed damage, consult your Earthquake Sound dealer
before proceeding with unit installation.
Retain the sales receipt as it established the duration of the
limited warranty and provided information for insurance
purposes.
Cinénova- 16 included components
IR
• 1 Power cord
• 8 Remote controls
• 8 Keypads (wallplates not included)
• 8 Phoenix speaker terminals
• 8 Phoenix pad connectors
• 1 16-channel Amplifier
System installation considerations
There are several factors to consider before installing the Earthquake
Sound Cinénova-IR16 system.
• What are the intended listening zones?
• What system options and accessories might be required for
features such as local sources, etc.?
• From where in each zone will the listener prefer to control the
system? Where will the remote gains be located? Where will the
speakers be located?
• Where will the source equipment be located?
Note: The Cinénova-IR16 must have adequate ventilation above and
below for air circulation and heat dissipation. In addition, rack mount
locations may require fans and vents.
Connection tips
It is recommended that the Cin
equipment be plugged into a dedicated 20-amp circuit with an
isolated ground.
Disconnect all live power cords before making connections to the
remote gain.
Keep all power cords away from all signal cables to prevent
humming from induced noise.
Choose reliable signal cables cords (Earthquake Sound also
specializes in high-performance RCA cables and patches).
All speaker wires that are ran through the walls should be twisted
type to reduce potential hum noise pick up.
Label both ends of all wires with the corresponding room
location.
It is best to use a grounded electrical outlet to power the
amplifier. Lack of input ground reference could be unsafe.
Consult with your electrical contractor about proper grounding.
7
Unpacking
énova-IR16 and the source