360 BANDIT WHITE 8000 Einbauanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Einbauanleitung für Industrielle Ausrüstung 360 BANDIT WHITE 8000 herunter. 360 BANDIT WHITE 8000 4 Seiten.

Seite drucken
INSTALLATION INSTRUCTIONS
WHITE 8000
STEP 6
INSTALL DISK ASSEMBLIES
9
15
17
16
14
14
Insert 5/8" X 3" bolt
14
through the disk
16
(large side first) and hose guide assembly
facing in).
Slide bolt of the disk assembly into the lower hole on the
BANDIT
14
, aligning the ear tab
18
with corresponding
upper hole and secure with lock nut.
Tighten with 15/16" socket and wrench.
Using a mallet, install provided dust caps over disk bolt
heads.
Repeat for other side.
STEP 7
ASSEMBLE PLUMBING
21
18
18
Install orifice plates
15
. Insert bushing
17
(ear tab
18
Assemble pluming components in the arrangement shown
above
.
21
Attach the plumbing assembly to each of the hoses coming
from the house guides
NOTE: If hoses are not fully seated in the push to connect,
they will leak. Hoses seat 7/8" of an inch deep or until you
hear a snap.
The supplied push to connect adapter in the 360 BANDIT kit
connects to 3/8" push to connect compatible hose.
Secure hoses to row unit with provided zip ties.
19
20
22
22
19
in the rubber grommets
20
.
22
.
PAGE 4
INSTALLATION COMPLETE
PLUMBING RECOMMENDATIONS:
To prevent excess fertilizer from dribbling out of the hoses
when product application is shut off, install one push to
connect polypropylene (Inlet x Outlet) 3/8" O.D. check valve
(not included) in the plumbing to each row prior to the 360
BANDIT orifices. Check valve is available at Dultmeier Sales
(Item #BUCV1103-P38).
A 50 mesh strainer (not included) can be used in the
complete plumbing system between tanks and 360
BANDIT to help prevent debris from blocking orifices.