Award PPS902SI Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Lüftungshaube Award PPS902SI herunter. Award PPS902SI 12 Seiten.
Seite druckenINSTALLATION
BEFORE FITTING THE HOOD TO THE WALL UNIT, PROCEED AS FOLLOWS:
• Remove grease filters.
• Disconnect the wires to the Commands at the connectors.
• Disconnect the wires to the Light at the connectors.
• The Hood can be installed directly
on the underside of the wall unit
(Minimum 650 mm from the
Cooker Hob).
• Create an opening in the bottom of
the wall unit, as shown.
• Insert the hood until the side sup-
ports snap into place.
• Lock in position by tightening the screws Vf from underneath the
hood.
• Re-connect the wires to the Commands and Light, replace the metal grease filter.
EN
Fitting the Hood canopy
7
7