Award PM580/1s Betriebs- und Installationsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Kochfeld Award PM580/1s herunter. Award PM580/1s 12 Seiten.

- WARNING: If the surface is cracked, switch off

the appliance to avoid the possibility of electric

shock.

- For hobs incorporating a lid, any spillage

should be removed from the lid before opening.

And also the hob surface should be allowed to

cool before closing the lid.

- The appliance is not intended to be operated

by means of an external timer or separate

remote-control system.

- Do not use harsh abrasive cleaners or sharp

metal scrapers to clean the oven door glass and

other surface since they can scratch the surface,

which may result in shattering of the glass or

damage to the surface.

- Do not use steam cleaners for cleaning the

appliance.

- Your appliance is produced in accordance with all applicable local and international standards and

regulations.

- Maintenance and repair work must be made only by authorized service technicians. Installation and

repair work that is carried out by unauthorized technicians may endanger you. It is dangerous to alter or

modify the specifications of the appliance in any way.

- Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure or

electricity voltage and frequency) and the requirements of the appliance are compatible. The

requirements for this appliance are stated on the label.

- CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic

household use only and should not be used for any other purpose or in any other application, such as

for non-domestic use or in a commercial environment or room heating.

- All possible security measures have been taken to ensure your safety. Since the glass may break, you

should be careful while cleaning to avoid scratching. Avoid hitting or knocking on the glass with

accessories.

- Ensure that the supply cord is not wedged during the installation. If the supply cord is damaged, it

must be replaced by the manufacturer, its service agent or similarly qualified persons in order to prevent

a hazard.