ALLIMEX SolarSpeed Montageanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Montageanleitung für Sonnenkollektor ALLIMEX SolarSpeed herunter. ALLIMEX SolarSpeed 15 Seiten. East-west facing landscape

Seite drucken

INSTALLATION

4. PLACEMENT CONCRETE BASE

Concrete base + impact anchor

Positioning concrete base

The Allimex concrete base is placed under

the full length of the connected base units.

This means that a base is placed at the end

and at the beginning of each connecter base

unit, as well as between the premounted

brackets. Rubber protection is placed

underneath each Allimex concrete foot to

protect the roof surface.

On a green roof or pebble roof you must remove the planting and/or pebbles where the concrete

bases should be placed.

ATTENTION! Concrete bases must be placed on all places as described above. In the absence of one

or multiple footings/bases, this could lead to serious stability problems.

Placement base-units

Once the Allimex concrete bases have been positioned correct-

ly, the connected base units can be placed on the bases and

attached. This attachment is done by SS rivets HPS-I 8/10x40.

This plug is punched into the provided holes with a hammer.

Next, the nail is screwed or punched into the plug. When pun-

ching the nail, it's convenient to use a screwdriver so the Solar-

Speed base units won't be damaged.

(optional)

Protective rubber