Christie CP2220 Anleitungsblatt

Blättern Sie online oder laden Sie pdf Anleitungsblatt für Racks & Ständer Christie CP2220 herunter. Christie CP2220 9 Seiten. Christie rack mount pedestal
Auch für Christie CP2220: Anleitungsblatt (6 seiten), Technisches Bulletin (6 seiten), Technisches Bulletin (8 seiten), Handbuch (2 seiten), Handbuch für Installation und Einrichtung (19 seiten)

INTRODUCTION

The following procedure should be performed whenever the coolant system needs to be refilled.

NOTICE: Never allow the pump to run dry to avoid damaging it.

KITS REQUIRED

• #003-001837-xx Coolant Refill Kit

INSTRUCTIONS

SERIES I

Series 1 projectors include the CP2000-S/-SB/-h/-i/-X/-XB/-Z/-M/-MR and the Roadie 25K/HD+30K/

HD+35K. For details on how to flush the coolant system on these models refer to, Roadie 25K/

HD+30K/HD+35K, CP2000-S/-SB/-h/-i/-X/-XB/-M/-MR/-ZX Coolant Flush Instruction Sheet

(P/N: 020-100179-03).

CP2000-S/-SB/-H/-I/-X/-XB AND ROADIE 25K/D+30K/HD+35K

ACCESS COOLING SYSTEM

1. Remove the projector lid. On the Roadie 25K/HD+30K/HD+35K or CP2000-X/-XB, open the

igniter door (Figure 1, left). On a CP2000-S/-SB/-i/-h (Figure 1, right), open the non-operator

side pedestal door and skip to Step 3.

Coolant Refill Instruction Sheet

020-100686-01 Rev. 1 (03-2011)

(includes JeffCool E105 jug of coolant, refill bottle, funnel, MSDS sheet)

Figure 1 Access Cooling System

Coolant Refill

Instruction Sheet

1 of 9