Christie UHD751-P Service-Handbuch - Seite 14

Blättern Sie online oder laden Sie pdf Service-Handbuch für Industrieller Monitor Christie UHD751-P herunter. Christie UHD751-P 20 Seiten.

4. Replace the OPS board.

5. To install the replacement part, follow these steps in reverse order.

Replacing the USB board

Learn how to remove and replace USB board.

1. Remove the rear cover.

2. Mark and remove all connectors.

3. Using a Phillips #1 screwdriver, remove the two screws securing the USB board to the display

panel.

4. Replace the USB board.

5. To install the replacement part, follow these steps in reverse order.

Learn how to remove and replace the Wi-Fi board.

1. Remove the rear cover.

2. Mark and remove all connectors.

3. Pull the clip holding the board in place away from the board, and lift the Wi-Fi board off the

post. Repeat for both sides of the Wi-Fi board.

4. Replace the Wi-Fi board.

5. To install the replacement part, follow these steps in reverse order.

UHD751-P Service Guide

020-102686-01 Rev. 1 (01-2018)

Replacement procedures