Alljoy AJMC22 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Massage Alljoy AJMC22 herunter. Alljoy AJMC22 8 Seiten.

Seite drucken

Care and Cleaning Instruc�ons

1. Do not wash in washing machine or immerse the product or the power cord in water.

2. Always switch oﬀ before cleaning and unplug from the electric outlet. with clean, dry hands.

3. The massager should be wiped with a slightly moist cloth and dried thoroughly. Do not wipe the

product with alcohol or harsh chemicals such as thinner or bleach.

4. The Cover for neck is detachable and washable.

5. Do not overstretch the elas�c back straps.

6. Keep away from heat, ﬁre or exposure to direct sunlight.

7. Do not apply excessive pressure or impact onto massager/massage heads. Applica�on of a direct

force in excess of 110 lbs. may damage your massager and invalidate your warranty. Refrain from

over usage of the device.

8. Store the massager in a cool, dry place out of reach of children.

9. Avoid contact with sharp edges or pointed objects which might cut or puncture the cover of

massager.

TROUBLESHOOTING GUIDE

Fault

Massage heads rota�ng at

reduced speed.

Massage heads only rotate in

the upper or lower region.

Device switches oﬀ suddenly

Device fail to start

Jerky mo�on of massage heads /

Vibra�ons from device

Infra-red lights are on but no

mo�on from massage heads

The load on the massage heads is excessive. Reduce

load and try again.

The massage has been ac�vated for the upper or

lower back region. Press the 'Full Back' bu�on for the

massage to cover both regions.

Device may have been in use for 15mins. Auto-shut-

oﬀ func�on ac�vated. Con�nue using by pressing the

'power' bu�on a�er res�ng the unit for 15mins.

Over-heat protec�on func�on ac�vated. Device is

switched oﬀ for your safety. Please rest device for 15-

30mins before restar�ng.

Check if device has been used for more than 15mins.

If so, let device rest for 15mins before con�nuing.

Device may require longer �me to cool in warmer

environments.

Check if the power cord is plug into electric outlet ﬁrmly.

Excessive pressure may have been applied onto the

device. Reduce the load and try again.

Device may be jammed. Remove pressure/load from

the device and press the power bu�on to try again.

Solutions