Miele WS 5071 Betriebsanleitung - Seite 28

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Waschmaschine Miele WS 5071 herunter. Miele WS 5071 36 Seiten. Washer-extractor

Seite drucken

Problem solving guide

Drain valve version:

Open the drain valve access flap (see

"Cleaning and care)".

Press the emergency release lever down-

wards, (see illustration) and hold down

until no more water drains out.

Press against the drum door and pull on

the emergency door opening mechanism.

Always make sure the drum is stationary

before reaching in to remove washing.

Reaching into a moving drum is extremely

dangerous.

M.-Nr. 05616270

Fault messages

Repairs to machines operating with electricity,

gas or steam should only be undertaken by a

suitably qualified service engineer to ensure

safety. Unauthorised repairs could be dan-

gerous.

Faults that occur before or after the start of a

programme are displayed in a flashing display.

PROGRAMME 1

PROGRAMME STOP

THROUGH POWER CUT

Please press the Start button.

When power is restored press the Start but-

ton X . This fault message can also indicate

that the winding protection of the drive motor

has overheated.

-Allow the motor to cool down.-

PROGRAMME 1

PROGRAMME STOP

WATER INLET FAULT

Open water stopcock and press Start button.

Open water stopcock and press Start button

X .

PROGRAMME 1

PROGRAMME STOP

DRAIN FAULT

Clean drain system and press Start button.

Check the drainage system on site and press

the Start button X . A defective drain valve

should only be repaired by the service depart-

ment or their authorised agent.

PROGRAMME 1

PROGRAMME STOP

HEATING SYSTEM FAULT

Short circuit on heater sensor 1

Call the Service department.

PROGRAMME 1

PROGRAMME STOP

HEATING SYSTEM FAULT

Cut-out of heating sensor 1.

Call the Service department.

COTTONS