Miele G 1 Series Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Geschirrspüler Miele G 1 Series herunter. Miele G 1 Series 46 Seiten.
Auch für Miele G 1 Series: Handbuch (14 seiten)

Technical Information
Function
Adjusting the main wash
temperature
Shortening program
sequence
Water quantity
normal/increased
Second interim rinse
Activating/deactivating
improved drying
Appliance width setting
Appliance height setting
Programming
Press the Program button
20x. To make the desired
setting, press and hold the
Program button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program button.
Press the Program button
22x. To make the desired
setting, press and hold the
Program button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program button.
Press the Program button
23x. To make the desired
setting, press and hold the
Program button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program button.
Press the Program button
26x. To make the desired
setting, press and hold the
Program button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program button.
Press the Program button
27x. To make the desired
setting, press and hold the
Program button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program button.
Press the Program button
35x. To make the desired
setting, press and hold the
1
Program button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program button.
Press the Program button
36x. To make the desired
setting, press and hold the
1
Program button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program button.
6
G 1xxx/G 2xxx
Display
The "Intake/Drain" LED flashes 2x
slowly. "SaniWash" LED is off:
standard setting; "SaniWash" LED
flashes: increased wash
temperature. Increased wash
temperature results in longer
running time.
The "Intake/Drain" LED flashes 2x
slowly and 2x rapidly. "SaniWash"
LED is off: Standard setting;
"SaniWash" LED flashes:
Shortened wash program. Program-
dependent shortening of running
time by reduction of temperature
and/or removing holding times.
The "Intake/Drain" LED flashes 2x
slowly and 3x rapidly. "SaniWash"
LED is off: Standard setting;
"SaniWash" LED flashes: Increased
water quantity. If "Increased water
quantity" is selected, water intake
increases by approx. 16.7 fl.oz.
(500mL).
The "Intake/Drain" LED flashes 2x
slowly and 6x rapidly. "SaniWash"
LED is off: Standard setting;
"SaniWash" LED flashes: With
second interim rinse.
The "Intake/Drain" LED flashes
2x slowly and 7x rapidly.
"SaniWash" LED is off: Standard
setting; "SaniWash" LED flashes:
Improved drying – depending on the
program, drying time is extended
and the final rinse temperature
increased.
The "Intake/Drain" LED flashes 3x
slowly and 5x rapidly. "SaniWash"
LED is off: Appliance width 24"
(60cm) (standard setting);
"SaniWash" LED flashes: Appliance
width 18" (45cm).
The "Intake/Drain" LED flashes 3x
slowly and 6x rapidly. "SaniWash"
LED is off: Standard appliance
height (G 1xxx); "SaniWash" LED
flashes: XXL models (G 2xxx).