Miele PG 8172 ECO Betriebsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Geschirrspüler Miele PG 8172 ECO herunter. Miele PG 8172 ECO 42 Seiten. Commercial dishwashers

Seite drucken

Operation

7.1 Before switching on the machine

Possible risk of damage due to suction of items from within the machine e.g. pieces of

cutlery

The pump inlet filter protects the circulating pump and the drain pump. Operate the machine

Caution

only with the pump inlet filter fitted.

7.2 Switching on the machine and preparing it for operation

7.3 Washing

Possible risk of scalding from hot wash water

 Keep children away from the commercial dishwasher. The wash water in the interior is at a

temperature of approx. 62 °C.

Caution

 Do not open the hood while the machine is washing. There is a risk of the hot wash water

spilling out. Stop the wash programme before doing so ( 7.3.7).

Possible risk of injury

 Do not place any objects on the hood.

 Arrange sharp, pointed utensils so that they do not cause injury.

Possible failure of the wash programme due to heavy dirt ingress

 Pre-rinse all dishes and pans with cold water. Remove food residues.

IMPORTANT

Do not place any heavy objects on the hood, so that the hood can always be opened easily

and cannot close accidentally on its own.

 Open the on-site water stop cock.

 Switch on the on-site mains disconnector.

 For your own safety, test the on-site residual-current circuit

breaker (FI).

 Open the hood.

 Remove the filter cylinder (1).

 Check whether the pump inlet filter (2) is fitted. If it is not

fitted there will be an error message when the machine is

switched on.

 Insert the filter cylinder (1).

 Check whether the spray arms (top and bottom) are fitted

and properly engaged.

 Close the hood.

 Check whether sufficient detergent and rinse aid are

present in the containers. Replace the containers in time

so that the cleaning results are not affected.

Operation