Miele DA 220-4 Betriebs- und Installationsanleitung - Seite 28
Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DA 220-4 herunter. Miele DA 220-4 36 Seiten. Ventilation system
Auch für Miele DA 220-4: Handbuch der Abmessungen (2 seiten), Betriebs- und Installationsanleitung (40 seiten)
Seite drucken
Installation
^ Insert the short edge of the two
spring clips into their slots from
below and pivot them 90° so that the
tab faces the center of the mounting
plate.
^ Pull the power cord through the
mounting plate.
^ Insert the four flat head screws
M 6 x 20 into the recessed holes from
above.
^ Tape the screws from above to
prevent them from being pushed
upwards when the nuts are tightened.
28
^ Screw the mounting plate through the
ceiling and into the structural framing
using 8 x 60 screws and washers.
Once tight, make sure that the
mounting plate can safely support
the weight of the hood.