Miele DA 237 Betriebsanleitung - Seite 23

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Lüftungshaube Miele DA 237 herunter. Miele DA 237 32 Seiten.

Address the retaining plate for the ex-

tension piece flush and horizontal to

the room ceiling. With the help of the

notches align with the central line

and mark the the positions on the

wall of the two bore holes.

With an 8 mm dia. bit, drill the holes

marked and then press the S8 plugs

into the holes.

Using 5 x 40 mm screws, loosely

screw on the top retaining plate for

the extension piece and the retaining

plate for the chimney piece of the

DA 239, adjust and secure.

Screw two 5 x 40 mm screws into the

bottom two holes, leaving the screw

heads protruding approx. 5 mm.

Non-return flap

(only for appliances with an integrated

fan)

Place the non-return flap into the ex-

haust connection of the motor unit so

that the flaps can open upwards.

Turn the non-return flap slightly to

the left to engage.

Installation