Miele DA 270-4 U Alu Betriebs- und Installationsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DA 270-4 U Alu herunter. Miele DA 270-4 U Alu 36 Seiten. Cooker
Auch für Miele DA 270-4 U Alu: Betriebs- und Installationsanleitung (36 seiten)

Seite drucken

Before connecting the appliance to

the mains supply, make sure that the

voltage and frequency details given on

the data plate correspond with the

on-site electricity supply, otherwise the

appliance could be damaged. Consult

a qualified electrician if in any doubt.

The electrical safety of this

appliance can only be guaranteed

when continuity is complete between

the appliance and an effective earthing

system which complies with current

local and national safety regulations. It

is most important that this basic safety

requirement is present and tested

regularly, and where there is any doubt,

the household wiring system should be

inspected by a qualified electrician.

The manufacturer cannot be held liable

for the consequences of an inadequate

earthing system (e.g. electric shock).

For safety reasons, this appliance

may only be used when it has been

fully installed.

Only open the housing as described

in the instructions given in the

installation sheet and in the Cleaning

and care section of this booklet. Under

no circumstances should any other

parts of the housing be opened.

Tampering with electrical connections

or components and mechanical parts is

highly dangerous to the user, and can

cause operational faults.

Warning and Safety instructions

Installation, maintenance and

repairs may only be carried out by a

Miele authorised person in accordance

with current national and local safety

regulations.

Repairs and other work by unqualified

persons could be dangerous. The

manufacturer cannot be held liable for

unauthorised work.

Faulty components must only be

replaced by genuine Miele original

parts. The manufacturer can only

guarantee the safety of the appliance

when Miele replacement parts are

used.

During installation, maintenance and

repair work, the appliance must be

disconnected from the mains electricity

supply. It is only completely isolated

from the electricity supply when:

– it is switched off at the isolator, or

– the screw-out fuse is removed (in

countries where this is applicable), or

– the mains fuse is disconnected, or

– it is switched off at the wall socket

and the plug withdrawn, or

– the fuse from the fused spur

connection unit is withdrawn.