Miele DA 399-7 Betriebs- und Installationsanleitung - Seite 24

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DA 399-7 herunter. Miele DA 399-7 40 Seiten.
Auch für Miele DA 399-7: Betriebs- und Installationsanleitung (36 seiten), Betriebs- und Installationsanleitung (40 seiten)

Cleaning and care

Changing a lamp

The lamps should be replaced with a

lamp of the same type:

Manufacturer ............................... EGLO

Lamp type .................................... GU10

Specification................................ 11427

Wattage ........................................... 3 W

ILCOS D Code...... DR-3-H-GU10-50/56

Alternatively the following lamps can be

used:

Manufacturer ............................... EGLO

Lamp type .................................... GU10

Specification................................ 11511

Wattage ........................................... 5 W

ILCOS D Code...... DR-5-H-GU10-50/54

These lamps have a different luminosity.

Only use lamps of the same type in the

cooker hood.

These lamps are available from Miele or

from specialist retailers.

 Switch off the fan and the lighting.



Note that lamps become very

hot when in use.

They can cause burns even after

being switched off for some time.

Allow the lamps to cool down for a

few minutes before changing them.

 Disconnect the cooker hood from the

mains electrical supply (see "Warning

and Safety instructions").

 Remove the grease filters.

 Turn the nut anti-clockwise as far as it

will go. The lamp will then drop down

towards you.

 Turn the lamp anti-clockwise and pull

it out.

 Screw the new lamp into the socket

and push it upwards. Please follow

the manufacturer's safety

instructions.