Miele DA 403 Betriebs- und Installationsanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DA 403 herunter. Miele DA 403 32 Seiten. Ventilation system
Auch für Miele DA 403: Betriebs- und Installationsanleitung (32 seiten), Produktabmessungen (2 seiten), Handbuch installieren (2 seiten), Betriebs- und Installationshandbuch (36 seiten), Betriebs- und Installationsanleitung (36 seiten), Betriebs- und Installationsanleitung (36 seiten)

Seite drucken
Miele DA 403 Betriebs- und Installationsanleitung
A timer monitors the hours of fan
operation. The indicator for the grease
filter will light after 30 hours of
operation. The grease filters must then
be cleaned.
After the grease filters have been
cleaned and put in place, the grease
filter timer must be reset.
^ To do this, press the grease filter
button for about 3 seconds.
The indicator will go out.
Recirculation mode only
The timer for the charcoal filter is not
preset. Please program this timer, see
"Operation/Reprogramming the
charcoal filter timer".
The charcoal filter indicator will light
once the selected time has elapsed.
The charcoal filter must then be
replaced and the charcoal filter timer
reset.
^ To do this, press the charcoal filter
button for about 3 seconds.
The indicator will go out.
14
To check the percentage of time
already used:
^ Press the On/Off button to turn the
fan on.
^ Press and hold the grease or
charcoal filter button.
The number of flashing " / " indicators
show the percentage of programmed
hours that have been used.
1 indicator = less than 25 %
2 indicators = less than 50 %
3 indicators = less than 75 %
4 indicators = less than 100 %
This information will remain stored in
memory in the event of a power failure.