Miele DA 403 Betriebs- und Installationsanleitung - Seite 29

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DA 403 herunter. Miele DA 403 36 Seiten. Ventilation system
Auch für Miele DA 403: Betriebs- und Installationsanleitung (32 seiten), Produktabmessungen (2 seiten), Handbuch installieren (2 seiten), Betriebs- und Installationshandbuch (36 seiten), Betriebs- und Installationsanleitung (32 seiten), Betriebs- und Installationsanleitung (36 seiten)

Seite drucken
Miele DA 403 Betriebs- und Installationsanleitung

Installation instructions

^ See the enclosed installation
instruction diagram.
^ Please read the "Important Safety
Instructions" and Installation
instructions before installing this
hood.
Protective film
The casing is covered with a protective
film to prevent scratching during
transport.
^ Peel off the film before installing the
casing parts.

Installation accessories

4 Screws 8 x 60 mm with
4 Washers
(S10 wall anchors included in the
packaging are not for use in USA / CDN)
2 spring clips to hang the hood onto
the mounting plate
4 Flat head screws M 6 x 20 mm with
nose and
4 M 6 locking nuts for securing the
motor assembly
1 hose clip for securing the ducting

Recirculation mode

If site conditions are not suitable for the
hood to be used for air extraction, the
appliance must be converted for
recirculation.
For recirculation mode a conversion kit
must be installed, available from Miele.
The conversion kit comes with an
Installation manual.
After the hood is installed the charcoal
filter must be inserted and the charcoal
filter timer must be set. See "Cleaning
and Care" and "Operation".
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.

Installation

29