Miele DA 408 Betriebs- und Installationsanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DA 408 herunter. Miele DA 408 36 Seiten. Ventilation system
Auch für Miele DA 408: Produktabmessungen (2 seiten), Einbauanleitung (1 seiten), Betriebs- und Installationsanleitung (36 seiten), Betriebs- und Installationsanleitung (36 seiten), Betriebs- und Installationsanleitung (36 seiten)

Operation

Filter timers

Grease filters

A timer monitors the hours of fan

operation. The indicator for the grease

filter will light after 30 hours of

operation. The grease filters must then

be cleaned.

After the grease filters have been

cleaned and put in place, the grease

filter timer must be reset.

^ To do this, press the grease filter

button for about 3 seconds.

The indicator will go out.

Charcoal filter

Recirculation mode only

The timer for the charcoal filter is not

preset. Please program this timer, see

"Operation/Reprogramming the

charcoal filter timer".

The charcoal filter indicator will light

once the selected time has elapsed.

The charcoal filter must then be

replaced and the charcoal filter timer

reset.

^ To do this, press the charcoal filter

button for about 3 seconds.

The indicator will go out.

To check the percentage of time

already used:

^ Press the On/Off button to turn the

fan on.

^ Press and hold the grease or

charcoal filter button.

The number of flashing "–/+" indicators

show the percentage of programmed

hours that have been used.

1 indicator = less than 25 %

2 indicators = less than 50 %

3 indicators = less than 75 %

4 indicators = less than 100 %

This information will remain stored in

memory in the event of a power failure.