Miele DAS 4930 Betriebs- und Installationsanleitung - Seite 33
Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DAS 4930 herunter. Miele DAS 4930 44 Seiten.
Seite drucken
Before installation
Before installation, it is important
to read the information contained in
this chapter and in the "IMPORTANT
SAFETY INSTRUCTIONS" chapter.
Information is subject to change. Please
refer to our website to obtain the most
current product specification, technical
& warranty information.
Installation recommendations
- To achieve optimum vapor extraction,
the hood must be centered over the
cooktop, not to the side.
- The cooktop should be no wider than
the hood. Preferably, it should be
narrower for better extraction.
- The mounting area must be easily
accessible. The ventilation hood
should be easy to reach and
disassemble in case a service call is
necessary. This should be taken into
consideration when planning the
position of cabinetry, shelves,
ceilings or decorative elements in the
vicinity of the ventilation hood.
Installation materials
1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for
recirculation mode). Depending on the
model, the non-return flap may already
be mounted.
4 mounting plates
for installation in a 23 ⁵/₈" (600 mm)
wide cabinet
2 brackets
for installation in a 35 ⁷/₁₆" (900 mm)
wide cabinet (only for 35 ¹/₄" (896 mm)
wide appliances)
2 spring clips
for installation in a 35 ⁷/₁₆" (900 mm)
wide cabinet (only for 35 ¹/₄" (896 mm)
wide appliances)
1 spacer strip
for concealing the gap between the
rear of the appliance and the wall
Installation
33