Miele Ventilation System Betriebs- und Installationsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele Ventilation System herunter. Miele Ventilation System 32 Seiten. Ventilation system
Seite drucken
IMPORTANT SAFETY INSTRUCTIONS
,WARNING
TO REDUCE THE RISK OF
INJURY TO PERSONS IN THE
EVENT OF A COOKTOP
GREASE FIRE, OBSERVE THE
FOLLOWING
*
:
~
a) SMOTHER FLAMES with a close
fitting lid, cookie sheet, or metal tray
then turn off the burner.
BE CAREFUL TO PREVENT BURNS.
If the flames do not go out immediately,
EVACUATE AND CALL THE FIRE
DEPARTMENT.
~
b) NEVER PICK UP A FLAMING
PAN - You may be burned.
~
c) DO NOT USE WATER, including
wet dishcloths or towels - a violent
steam explosion will result.
~
d) Use a fire extinguisher ONLY if:
1) You have a class ABC
extinguisher, and you know how to
operate it.
2) The fire is small and contained in
the area where it started.
3) The fire department is being
called.
4)You can fight the fire with your
back to an exit.
*
Based on "Kitchen Firesafety Tips"
published by NAFTA
6
~
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.
~
Children should be supervised to
ensure that they do not play with the
appliance.
,CAUTION
Accessible parts may become
hot when used with cooking
appliances.
~
Always turn on the hood when using
the cooktop to prevent damage from
condensation.
~
Never operate gas burners without
cookware. Turn the burner off when not
in use. Adjust the burner so that the
flames do not extend beneath the
cookware. Do not overheat the
cookware, e.g. when using a wok. The
hood can be damaged due to
excessive heat from the burners and
the cookware.
~
Do not use the hood without the
grease filters in place.
~
Do not use a steam cleaner to clean
the hood. Steam could penetrate
electrical components and cause a
short circuit.