Miele EcoSpeed TWD440 WP Installationshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Installationshandbuch für Trockner Miele EcoSpeed TWD440 WP herunter. Miele EcoSpeed TWD440 WP 15 Seiten.

Seite drucken

Installation

Electrical connection

The tumble dryer is supplied with a

mains cable with moulded plug ready

for connection to a suitable earthed

socket.

The socket must be easily accessible

after the tumble dryer has been in-

stalled. If the socket is not easily ac-

cessible, ensure that a suitable means

of disconnection is provided on the in-

stallation side for each pole.



Risk of fire from overheating.

Connecting the tumble dryer to a

multi-socket adapter or to an exten-

sion lead can overload the mains

connection cable.

For safety reasons, do not use an ex-

tension cable or multi-socket ad-

apter.

The electrical system must comply with

local and national safety regulations

(BS 7671 in the UK).

For safety reasons, we recommend us-

ing a type A  residual current device

(RCD) in the relevant electrical installa-

tion for connecting the tumble dryer.

If the mains connection cable is dam-

aged, it must only be replaced with a

specific mains connection cable of the

same type (available from the Miele

Customer Service Department). For

safety reasons, such replacement may

only be carried out by a qualified spe-

cialist or the Miele Customer Service

Department.

11692290-02

These operating instructions and the

data plate indicate the nominal power

consumption and the appropriate fuse

rating. Compare this information with

the data of the on-site electrical con-

nection.

If in any doubt, consult a qualified elec-

trician.

Do not connect the tumble dryer to a

stand-alone inverter, such as those

used with an autonomous power sup-

ply, e.g. solar power. When the tumble

dryer is switched on, power surges

could result in auto switch off. This

could damage the electronic module.