Miele PT 7188 EL Handbuch der Abmessungen - Seite 8
Blättern Sie online oder laden Sie pdf Handbuch der Abmessungen für Trockner Miele PT 7188 EL herunter. Miele PT 7188 EL 8 Seiten.
Seite drucken
Vented
Nominal air throughput in vented mode
Max. permissible pressure loss
Waste air/gas temperature, max.
Connector on machine (int. diameter)
Connection pipe provided on site (ext. diameter)
Miele adapter, Mat. No. 6595070 (int. diameter 100 mm) for
flexible aluminium ducting and adapter, Mat. No. 915051,
(ext. diameter 110 mm) for connection to standard heat-
resistant plastic pipes supplied.
As relative humidity inside the vent ducting can be as high as
100%, suitable measures must be taken to prevent a back-
flow of condensate into the machine.
Air intake
Standard Connection:
the air extracted.
Fittings (supplied) Miele US 6008 plinth
4 × metal angled brackets
(to secure machine to plinth)
4 × screws DIN 571 (Ø × length)
4 × rawl plugs (Ø × length)
Machine must be bolted to the floor!
Fixing materials for a floating screed floor are to be provided
on site.
On concrete platform
2 × clamps
2 × screws DIN 571 (Ø × length)
2 × rawl plugs (Ø × length)
Machine must be bolted to the floor!
Fixing materials for a floating screed floor are to be provided
on site.
Machine data
Unit width
Machine depth
Unit height
Casing width
Casing depth
Minimum width of delivery access to installation site
Minimum rear wall gap (measured to front of machine)
Wall gap (to front of machine)
Minimum gap ensures sufficient space for maintenance and
servicing.
Net weight
Dynamic floor load, max.
Average heat dissipation
(dependent on ambient room temperature and programme
selected)
Sound pressure (re 20 mPA),
workplace-related (at distance of 1 m and height of 1.6 m)
Installation should only be carried out by authorized fitters in accordance with valid regulations!
Observe installation instructions when installing machine! All rights reserved! Measurements in mm.
Technical datasheet: PT 7188 EL
Date: 28.03.2014
Air intake from installation site
Min. air intake cross-section
(to prevent draughts in room)
A sufficient supply of fresh air should be ensured to replace
m³/h
320
Pa
420
°C
80
mm
100
mm
100
cm²
237
mm
6 × 50
mm
8 × 40
mm
6 × 50
mm
8 × 40
mm
700
mm
763
mm
1020
mm
692
mm
690
mm
720
mm
1100
mm
900
kg
77
N
1000
W
450
dB (A)
<70
Page: 8