HP 226824-001 - ProLiant - ML750 Einführung Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Einführung Handbuch für Desktop HP 226824-001 - ProLiant - ML750 herunter. HP 226824-001 - ProLiant - ML750 12 Seiten. Visualization and acceleration in hp proliant servers
Auch für HP 226824-001 - ProLiant - ML750: Häufig gestellte Fragen (4 seiten), Handbuch zur Umsetzung (35 seiten), Technisches Weißbuch (12 seiten), Firmware-Aktualisierung (9 seiten), Übersicht (20 seiten), Handbuch zur Umsetzung (26 seiten), Einführung Handbuch (22 seiten), Handbuch zur Fehlersuche (18 seiten), Handbuch zur Umsetzung (11 seiten), Installationshandbuch (2 seiten), Konfigurationshandbuch (2 seiten), Einführung Handbuch (19 seiten), Handbuch aktualisieren (9 seiten), Handbuch aktualisieren (16 seiten), Einführung Handbuch (10 seiten), Technologie-Brief (9 seiten)

SCSI RDMA Protocol

SCSI RDMA Protocol (SRP) encapsulates SCSI commands over InfiniBand for SAN networking.

Operating from the kernel level, SRP allows SCSI commands to be copied between systems via RDMA

for low-latency communications with storage systems.

Since some network devices can send data faster than the destination device can receive it, InfiniBand

uses a queue pair (one send, one receive) system similar to the one for RDMA over TCP. InfiniBand

queue pairs may be located in the HCA or TCA of each device or, if necessary, in main memory.

When a connection between two channel adapters is established, the transport layer's

communications protocol is selected and queue pairs are assigned to a virtual lane.

The transport layer communications protocol can be implemented in hardware, allowing much of the

work to be off-loaded from the system's processor. The transport layer can handle four types of data

transfers for the Send queue:

• Send/Receive – Typical operation where one node sends a message and another node receives the

message.

• RDMA Write – Operation where one node writes data directly into a memory buffer of a remote

node.

• RDMA Read – Operation where one node reads data directly from a memory buffer of a remote

node.

• RDMA Atomics – Combined operation of reading a memory location, comparing the value, and

changing/updating the value if necessary.

The only operation available for the receive queue is Post Receive Buffer transfer, which identifies a

buffer that a client may send to or receive from using a Send, RDMA Write, or RDMA Read data

transfer.

RDMA operations can provide iWARP functionality to today's Ethernet networks and relieve the

congestion that 10-Gb Ethernet might otherwise cause. High-performance infrastructures such as

InfiniBand use RDMA as a core function to efficiently handle high data throughput that previously

required specialized networks.

HP is a founding member of the RDMA Consortium, an independent group formed to develop the

architectural specifications necessary to implement products that provide RDMA capabilities over

existing network interconnects. Many of the concepts and technologies leveraged for RDMA come

from high-end servers, such as HP NonStop and SuperDome servers, and from established networking

used in storage area networks (SANs) and local area networks (LANs). HP has led the development in

networking and communication technologies, including cluster interconnects such as ServerNet, the

Virtual Interface (VI) Architecture, and InfiniBand, which represent the origins and evolution of RDMA

technology.

Today, HP is at the forefront of the RDMA technology initiative and is a trusted advisor on future data

center directions that provide lasting value for IT customers. HP is committed to support RDMA as

applied to both Ethernet and InfiniBand infrastructures, and to help customers chose the most cost-

effective fabric interconnect solution for their environments.