HP 285 Pro G6 Microtower PC ENERGY STAR Anweisungen zur Demontage des Produkts nach Ablauf der Lebensdauer - Seite 3
Blättern Sie online oder laden Sie pdf Anweisungen zur Demontage des Produkts nach Ablauf der Lebensdauer für Desktop HP 285 Pro G6 Microtower PC ENERGY STAR herunter. HP 285 Pro G6 Microtower PC ENERGY STAR 7 Seiten.
Seite drucken
26. Remove the battery from the system board
27. Use PH1 to unscrew screws to loosen top cove
28. Remove the cover from chassis
29. Use PH1 screw driver to loose the screws and remove PCBA away from bottom chassis
30. Use PH1 screw driver to loose the screws
31. Disconnect fan cable from MB and remove the fan
32. Heat the solder of the Electrolytic Capacitors of greater than 2.5cm in diameter or height and Remove it
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the
product that require selective treatment (with descriptions and arrows identifying locations).
Step1 Use T-15 screw driver to loose the screws
Step3 Remove front bezel from chassis
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at
Step2 Open access panel
Step4 Use T-15 screw driver to loose the screws and remove
the iron
EL-MF877-01
Page 3