HP 3000 Series Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Desktop HP 3000 Series herunter. HP 3000 Series 25 Seiten. 9x9 to k class conversion
Auch für HP 3000 Series: Upgrade-Handbuch (19 seiten), Handbuch (20 seiten), Installationshandbuch (42 seiten)

Seite drucken

• Link Level Message encoding:

– SNA IMF/iX supports both NRZ and

NRZI encoding.

• Access to the SNA IMF/iX intrinsics in pro-

grammatic mode is provided in capability-

mode as well as native-mode with the use of

HP-provided switch stubs.

• In Pass Thru mode, terminals configured as

consoles are not supported.

Product Requirements

• SNA IMF/iX requires an IBM System/370 or

compatible mainframe (models 370, 30xx,

0r 43xx) with an IBM 37xx communications

controller. The following software must be

running on the IBM host and communica-

tions controller:

– MVS/SP, MVS/XA, DOS/VSE, or VM

– ACF/VTAM

– ACF/NCP

• For communications to an IBM S/36, IBM

S/38, or IBM AS/400 minicomputer, the fol-

lowing software must be running on the IBM

systems:

– SSP (S/36) Release 5

– CPF (S/38) Release 7.0

– OS/400 (AS/400) Release 2 and the

HP 3000 must be running MPE/iX

Release 4.0 or later.

• HP will support certain versions, releases,

modifications, and PTF levels of the above

software. Your HP Sales Representative or

Systems Engineer can determine whether

SNA IMF/iX can be supported with your

particular configuration. The Network

Implementation Support plan (NISP) will

help the customer engineer determine sup-

port requirements in advance of the installa-

tion of SNA IMF/iX in a particular network.

• SNA IMF/iX Product Requirements

– HP 3000 Series 900 computer system

– HP 30291B SNA/SDLC Link/iX

– J2167B SNA/Token Ring Link/iX

– HP 36939B SNA/X.25 Link/iX

Installation and Configuration Policy

The customer is responsible for loading the

SNA IMF/iX software onto the system.

Hewlett-Packard will perform minimum

configuration of SNA IMF/iX in order to verify

minimum product functionality. This activity

is included in the product purchase price.

Customer Responsibility

Prior to having HP personnel onsite to

perform minimum configuration of SNA

IMF/iX, the customer is responsible for the

following:

• Providing HP with the information neces-

sary to complete the Network

Implementation and Support Plan (NISP),

including:

– system configurations

– logical network map identifying relevant

traffic flow

– physical network map identifying relevant

network hardware components

• Verifying that the necessary host mainframe

software is installed and configured to sup-

port SNA IMF/iX. The customer should con-

tact the HP Sales Representative for typical

host parameter values or consult the

"HP SNA Products Remote System

Configuration Guide" (J2220-61025) for

details.

• Verifying that the SNA/SDLC Link/iX,

SNA/Token Ring Link/iX, or SNA/X.25

Link/iX is properly installed and configured

prior to the installation of SNA IMF/iX

unless the link product will be installed at

the same time.

• Updating the HP 3000 system to the proper

release level and installing the SNA IMF/iX

software using AUTOINST. Refer to the

HP 3000 MPE/iX Installation and Update

Manual (36123-90001).

HP 3000

Bus ness

Servers