Miele T 8903 C Betriebsanleitung - Seite 40
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Trockner Miele T 8903 C herunter. Miele T 8903 C 48 Seiten. Condenser tumble dryer
Seite drucken
Programmable functions
Changing the residual
moisture of the "Cottons"
programme
The electronics of this dryer ensure a
very effective and energy-efficient
drying process.
You can, however, extend the range
of the drying level in this programme
to adjust the amount of moisture in
laundry at the end of the programme.
Follow steps (A,B,C ...) with the
help of the Start button and
programme selector to programme
and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
– The programme selector is turned to
Finish.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
C Wait until Start lights up
constantly. . .
D . . . and then release the Start button.
40
The Finish/Anti-crease indicator light
will flash once.
The flashing Drying indicator light
shows which option is selected.
– If the Drying indicator light doesn't
flash:
Residual moisture will increase.
– If the Drying indicator light flashes
once:
Factory default settings.
– If the Drying indicator light flashes
twice:
Residual moisture will decrease.
E You can switch from one option to
the other by pressing the Start button
(Drying indicator light).
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can alter the
settings again at any time.
Control
^ Repeat steps A to D.
^ After checking the indicator lights
(see above), switch the dryer off.