Miele Touchtronic T 9800 Betriebs- und Installationsanleitung - Seite 25

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Trockner Miele Touchtronic T 9800 herunter. Miele Touchtronic T 9800 44 Seiten. Vented dryer
Auch für Miele Touchtronic T 9800: Produktabmessungen (3 seiten), Benutzerhandbuch (44 seiten)

Seite drucken

Fault indicators

The "Check Filter/Vent" indicator lights.

Possible fault

The dryer does not work

at its optimum or not

efficiently. The lint filter

might be clogged with

lint or detergent

residues.

The exhaust duct may

be too long. This is not a

fault.

The ducting is clogged

or kinked.

A program is canceled.

The "Check Filter/Vent" indicator flashes.

The fault cannot be

detected immediately.

The dryer is making a thumping or grinding sound.

The sound is caused by

the high airflow rate in

the ducting of the dryer.

This is not a fault.

Frequently asked questions

Solution

– Usually cleaning the lint filter fixes the problem.

If the problem persists, check all possibilities as

described under "The program runs too long or

stops".

– Open and close the door to turn off the indicator.

With a long exhaust duct, program times and energy

consumption increase. See Installation Instructions.

Check that the ducting is not blocked.

– Check the possible faults as described above.

– Open and close the door to turn off the indicator.

– Start a program.

If the problem persists contact Technical Service.

– To determine if the noise is due to airflow,

temporarily remove the exhaust duct from the

machine. If the noise lessens, the ductwork is the

cause of the noise. Rigid or flexible aluminum

ducting is the best option for reducing the noise.

If the problem persists please contact Technical

Service.