Miele Classic C1 Turbo Team Betriebsanleitung - Seite 13
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Staubsauger Miele Classic C1 Turbo Team herunter. Miele Classic C1 Turbo Team 24 Seiten. Canister vacuum cleaner
Seite drucken
References to illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these Operating Instruc-
tions.
Preparing for use
Attaching the suction hose (Fig. 01)
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position.
Remove the suction hose
Press both release buttons at the
side of the hose connector and lift
the hose from the socket .
Connect the suction hose to the han-
dle (Fig. 02)
Fit the connector at the other end of
the suction hose into the handle until
it clicks into position.
Your vacuum cleaner is fitted with one
of the following suction wands, de-
pending on model.
– EasyLock suction wand
– Comfort telescopic suction wand
To assemble the EasyLock wand
(Fig. 03)
Hold the suction wand by the con-
nection piece and push it into the
second suction wand, turning it
clockwise or counter-clockwise until
it clicks into position.
Slide the connection piece upwards
until it clicks into position.
Connecting the handle to the wand
(Fig. 04)
Insert the handle into the suction
wand until it clicks into position. To
do this, line up the guides on the two
pieces.
To detach the handle
To release the handle from the wand,
press the release button and pull the
handle out of the wand, twisting it
slightly as you do so.
Adjusting the telescopic suction
wand (Fig. 05)
One part of the telescopic suction wand
is packed inside the other and it can be
adjusted to suit your height for comfort-
able vacuuming.
Grasp the release mechanism and
adjust the telescopic suction wand to
the required length.
Connect the suction wand to the
floorhead (Fig. 06)
Push the suction wand into the floor-
head and turn it clockwise or
counter-clockwise until it clicks into
position.
To separate the suction wand from
the floorhead, press the release but-
ton and pull the suction wand away
from the floorhead, twisting it slightly
as you do so.
Adjusting the floorhead (Fig. 06)
(only for models with a reversible floor
head included in the standard version)
This vacuum cleaner can be used for
daily cleaning of carpets, rugs, and ro-
bust hard flooring.
en-US
13